SCS

Санаттар

SCS
  • WSMONITOR3 Wrist Strap Monitor

    Damage to electronic devices is caused by static electricity from people. Connecting people to ground directs static electricity away from devices.

    By SCS 324

  • 2209 Disposable Wrist Strap

    SCS' 2209 disposable wrist strap meets the ANSI/ESD S20.20 wrist strap system required limit tested per ESD TR53, providing cost effective personnel grounding.

    By SCS 256

  • Benchtop and Overhead Air Ionizers

    SCS' air ionizers are self-contained, ionized air blowers designed to neutralize electrostatic charges from non-conductive objects and isolated conductors.

    By SCS 368

  • Static Control Smocks

    SCS' smocks are designed to be antistatic, low turbocharging, and create a Faraday Cage around the torso and arms of the wearer to protect ESD susceptible items from electrostatic fields gener

    By SCS 292

  • 1300 Static Shielding Bags

    SCS' transparent metal-in static shielding bags are designed to provide a static safe environment for ESD sensitive electronic devices. Bags are printed with an ESD protective symbol, and a lo

    By SCS 225

  • 2300R Series, Cushioned Static Shield Bag

    SCS’ 2300R series metallized static shielding bag with closed cell air-cushion protection layers provides lightweight ESD protective packaging.

    By SCS 191

  • Iron Man™ Plus Workstation Monitor

    The SCS Iron Man™ Plus workstation monitors a voltage level that is being generated on a printed circuit board while working on it.

    By SCS 219

  • 770075 WSMONITOR2 Plus Workstation Monitor

    The SCS 770075 WSMONITOR2 plus workstation monitor uses a solid-state capacitance design to continuously test the ground integrity of two operators and one worksurface, thus eliminating the need f

    By SCS 334

  • MIL-PRF-81705E Type III, Class 2 Static Control Ba

    SCS now manufactures a series of bags and film which are qualified to MIL-PRF-81705E Type III, Class 2. These products are on the Qualified Product Listing under the Defense Standardization Progra

    By SCS 338

  • R3 Dissipative Rubber Work Surface Mats

    SCS features their R3 dissipative rubber worksurface mats which are static-safe work surfaces that is resistant to solvents, hot solder, and soldering irons.

    By SCS 255

  • Verification Tester

    SCS' verification tester is used to perform periodic test limit verification for the SCS workstation and portable monitors.

    By SCS 385

  • Dual-Wire Static Control Smocks

    SCS' dual-wire static control smocks protect ESD susceptible items by creating a Faraday cage around the torso and arms of the wearer.

    By SCS 262

  • 8900 Series Dissipative Rubber Worksurface Mat Kit

    The SCS 8900 series of dissipative rubber mats and rolls meet ANSI/ESD S20.20 required limit and the recommendation of work surface standard ANSI/ESD S4.1.

    By SCS 233

  • WSMONITOR2 Plus Verification Tester

    The SCS WSMONITOR2 Plus verification tester can verify calibration of the WSMONITOR2 Plus workstation monitor in-house without removing it from its workstation.

    By SCS 214

  • Resistance Pro Meter and Accessories

    The SCS resistance pro meter is an instrument designed to measure resistance point-to-point (Rtt) or surface-to-ground (Rtg).

    By SCS 319

  • Electrostatic Discharge Product Line

    SCS offers a comprehensive line of products for ESD management products including wrist straps, table mats, shielding bags, and more.

    By SCS 331

  • 497AJH HEPA Vacuum

    SCS's 497AJH HEPA vacuum is designed for removing 99.97% of 0.3 micron diameter particles from hazardous material, toner, dust, and more.

    By SCS 330

Top