Texas Instruments' THS3491 is a high-voltage, low-distortion, high-speed, current-feedback amplifier operates over a wide supply range of ±7 V to ±16 V.
By Texas Instruments 610
ON Semiconductor's AEC-Q100 qualified families of voltage output current sense amplifiers measure voltage across shunts at common-mode voltages.
By ON Semiconductor 1236
STMicroelectronics’ FDA803D is an innovative 1 channel class D audio amplifier, suitable for a wide range of automotive applications.
By STMicroelectronics 854
Texas Instruments' INA1620 integrates a dual, bipolar-input, audio operational amplifier with four high-precision thin-film resistor arrays on the same die.
By Texas Instruments 1544
ROHM's LMR1802G-1B low-noise CMOS op amp utilizes a vertically integrated production system that leverages original analog design technologies for the automotive market.
By ROHM Semiconductor 764
Texas Instruments' INA4180 quad-channel amplifies voltage developed across current-sensing resistor as current flows through the resistor to the load or ground.
By Texas Instruments 908
Texas Instruments' INA4181A1 is a 26 V, common-mode, current-sensing amplifier used in low-side and high-side configurations.
By Texas Instruments 614
STMicro's TDA7803A digital input automotive quad-power amplifier has the audio quality and efficiency giving an advantage in all the multi-channel systems.
By STMicroelectronics 921
STMicro's TSV992IQ2T dual rail-to-rail operational amplifier is ideal for sensor interfaces, active filtering, and battery-supplied and portable applications.
By STMicroelectronics 639
STMicroelectronics' TSB712A op amp combines wide bandwidth, low noise, and rail-to-rail capability making it well-suited for use in a variety of applications.
By STMicroelectronics 589
Power by Linear™ / Analog Devices’ LT1997-2 is an attenuating (funnel) difference amplifier that can be used to translate large differential signals.
By Linear Technology 795
TI's LMV358 low-voltage, rail-to-rail output, operational amplifier can be operated as a single-supply or dual-supply amplifier for a variety of applications.
By Texas Instruments 614
TI's OPA2810 dual-channel op amp can source and sink large amounts of current without degradation in its linearity performance in suitable applications.
By Texas Instruments 865
Diodes’ PAM8016 supports a wide range of inputs, differential, single-ended, or PWM inputs to ease the host microcontroller in driving the haptic elements.
By Diodes Incorporated 910
The LTC6363 from Linear Technology is a low power, low noise, fully differential op amp with rail-to-rail outputs optimized to drive low power SAR ADCs.
By Linear Technology 627
Linear Technology's operational amplifiers can serve as a signal chain building block in portable, energy harvesting, and wireless sensor applications.
By Analog Devices Inc 478
TI's TPA3138D2 is a low-idle-power, cost-effective, general purpose class D audio amplifier with a built-in spread spectrum control that reduces EMI.
By Texas Instruments 769
Linear Technology/Analog Devices' LTC2063 and LTC2064 are 20 kHz operational amplifiers enabling high resolution measurement at extremely low power levels.
By Analog Devices Inc 445
STMicroelectronics’ TSU111/TSU112 operational amplifiers have ultra-low-power consumption per channel of 900 nA (typ.) and 1.2 µA (max.) when supplied by 3.3 V.
By STMicroelectronics 1032
Analog Devices' 90 MHz, 2200 V/µs, 30 V amplifiers for data acquisition systems, wideband single amplifications, and high-fidelity video/audio applications.
By Linear Technology 1406