3455RC REDI-TEMP Series Thermostats

By Honeywell Sensing and Productivity Solutions T&M 283

3455RC REDI-TEMP Series Thermostats

Honeywell Sensing and Productivity Solutions' 3455RC REDI-TEMP series thermostats are single pole, single throw, snap-acting, non-adjustable products. A temperature-sensitive bimetal disc, electrically and thermally isolated from the switch, is used to actuate the contacts. Contacts open or close when surface or ambient temperatures increase to the operating set point of the calibrated metal disc. The entire switch is enclosed in a ceramic housing; the bimetal disc is retained by a metal heat-conducting end cap. Due to the small size of this unit and the inherently low mass of the bimetal snap-action disc, response of this thermostat to temperature changes is extremely rapid, compared to other commercially available thermostatic devices.

  • Automatic reset
  • High profile, ceramic housing
  • Preconfigured with B203S moveable bracket
  • Rivet sleeve construction
  • Silver alloy contacts
  • Pre-set and tamperproof
  • 0°C to 260°C (32°F to 500°F) operating temperature range
  • High temperature
  • High current
  • UL, CSA, VDE
  • Cost effective
  • Power supplies
  • Appliances
  • Medical equipment
  • Water heaters
  • Office automation
  • Industrial equipment
  • HVAC equipment